What Ip Address Does Zmodo Mini Wifi Cameras Use For Windows

Zmodo has a new setup method called 'Zink' for smart WiFi devices. If y'all have purchased your product recently, it may take been updated with a newer firmware that is compatible with the 'Zink' setup process. If yous have one of the following products, your device may be compatible with 'Zink':

ane) Pivot (ZM-SH86B001-WA)

2) Greet (ZM-SHD003B)

three) Smart WiFi Doorbell (ZM-CJAED)

4) Mini WiFi Camera (ZM-SH75D001-WA)

5) PT Photographic camera (ZH-IZV15-WAC)

six) WiFi Photographic camera Kits (ZM-W0002, ZM-W003, ZM-W0004, etc.)

7) NVR kits with WiFi cameras

8) Beam (ZM-SHRZ01W)

If your quick guide instructs you to use 'Zink' please follow these instructions to set up your WiFi device. If your quick guide instructs you to use SmartLink, delight skip to the "Using SmartLink" section to set up your device using SmartLink.

You may also view our Zink video tutorial for guidance on the setup.

Note: If you already have a Axle installed, yous will be able to ready upward your device using the "Automatic Connection" setup method. "Automatic Connection" uses your Beam to connect all of your 'Zink'-compatible WiFi devices in a few piece of cake steps.

Using Zink:

1) Earlier you brainstorm:

Make certain you have read the minimum requirements for your product. If yous are connecting a Greet, Torch Pro, or a Smart Doorbell, you lot volition need to complete the installation steps before configuring your product.

2) Download the free app and create a free account.

Download and open up the free 'Zmodo' app from Google Play or the App Shop and sign upwards for a free Zmodo account. Y'all can create an account using a valid email accost (shown below) or a phone number.

If you already accept a Zmodo account, delight log in.

three) Open the (+) Add Device bill of fare and get-go the 'Zink' Setup Process.

Once you've logged into your account, you will be taken to your Device List abode screen. Open the Add together Device "+" menu on the upper correct-hand corner and select the 'Zink' setup method. If you lot exercise non have a Beam already, select the 'Normal' setup option.

4) Connect to your phone to your WiFi device's wireless bespeak.

Your will be prompted to connect to your device'due south WiFi signal. Press "Tap hither to select WiFi" to go to your smartphone's WiFi settings page, and select your device's WiFi signal. If you're connecting a Beam, connect to the SSID called "AP_ZMD". If you're connecting whatever other 'Zink' WiFi device, connect to the SSID called 'ZMD_SAP'.

5) Enter your WiFi information into the corresponding fields.

Enter the WiFi information (SSID and password) for the WiFi network that you lot desire your device to connect to. Please note that you lot demand atwo.4GHz WPA/WPA2 countersign-protected WiFi network, and that your network proper name (SSID) mustNoninclude spaces, and it mustNOT be hidden. For case, "My Router" will notwork, but "My_Router"willwork.

You can admission your router'southward settings to change your SSID.

'Zink' volition automatically find and connect your device. The app may prompt you lot to connect to your WiFi network. If it does, please select "Tap here to select WiFi" and connect you lot smartphone to your WiFi network. In one case connected, you lot tin render to the Zmodo app until your device is connected.

half dozen) Proper noun your device.

Once your Zmodo device is successfully connected, you lot will be prompted to proper name your device and set the timezone. You tin select a unique name, or y'all can proper name information technology afterward its location or part. It is recommended that you ready a device password for security. It will so inquire you whether yous desire to share your device or non. Once these steps are completed, your Zmodo wireless device volition be set up for use!

Using SmartLink:

1) Before you begin:

Make sure you have read the minimum requirements and have successfully completed the installation portion of this support page. Connect your Android or iOS smartphone to the WiFi network that you lot desire to connect to your Zmodo wireless device (must be ii.4GHz).

2) Download the free app and create a complimentary account.

Download and open the free 'Zmodo' app from Google Play or the App Shop and sign upwards for a gratis Zmodo account. You lot tin can create an account using a valid email address (shown below) or a phone number.

If you already accept a Zmodo account, please log in.

iii) Select the (+) Add Device option.

In one case you've logged into your account, you lot will be taken to your Device List home screen. Select the Add together Device "+" option on the upper correct-mitt corner. A few in-app instructions volition help guide you lot to set up your Zmodo wireless device for network configuration.

4) Enter your WiFi password.

Power on your device(southward) and select the number of devices that yous are going to configure. You will be prompted to enter the password for the WiFi network that your phone is connected to. This will exist the WiFi network that your Zmodo device will connect to. For your convenience, delight make certain that you lot enter your countersign advisedly and correctly (case-sensitive). Please allow a few minutes for SmartLink to automatically observe and connect your device to the WiFi network.

5) Name your device.

Once SmartLink has successfully continued your Zmodo device, you lot will be prompted to name your device and set the timezone. You can select a unique name, or yous can name it after its location or role. It is recommended that you set a device password for security. It volition so enquire yous whether yous want to share your device or non. Once these steps are completed, your Zmodo wireless device will be ready for use!

Mutual Troubleshooting Tips

If your device isn't connecting to the wireless network, y'all may exist encountering some common and resolvable problems. Delight endeavor one of the post-obit if you are having trouble connecting your device:

one) You may have entered your WiFi password incorrectly. Please reset your device. Look for it to ability back on, and retry the setup process once the LED is blinking green.

2) Your wireless signal may exist as well weak. In order to improve your wireless signal, please refer to the FAQ on improving wireless signal force.

3) All the same having trouble? Contact our friendly support team at back up@zmodo.com.

Source: https://support.zmodo.com/index.php?action=artikel&cat=27&id=101&artlang=en

Posted by: guywithed.blogspot.com

Share this post